2-41, Jalan Puteri 4/6,
Bandar Puteri,
47100 Puchong,
Selangor, Malaysia.
+603-8069 1433
+6019-338 6894
+6019-338 6894
+603-8069 1533
- Air Compressor
- Air- Breaker
- Bar Bender & Bar Cutter
- Boom Lift
- Forklift
- Generator
- Lighting Tower
- Roller Compactor
- Scissor Lift
- Screed Pump
- Skid Steer Loader BOBCAT
- Water Pump
- Welding Machinery
Hitech One Machinery Sdn Bhd
2-41, Jalan Puteri 4/6,
Bandar Puteri,
47100 Puchong,
Selangor, Malaysia.
2-41, Jalan Puteri 4/6,
Bandar Puteri,
47100 Puchong,
Selangor, Malaysia.
Telehandler Compact Series 3507H
| Previous | 1 / 3 | Next |
Features
- Lift height: reach up to an impressive 6.9 m of precise and controlled lift height.
- Engine: powerful yet efficient and economical side-mounted Tier III diesel engine.
- Comfort: impressive visibility, adjustable seating and steering column, customized controls.
- Smooth: single joystick controller helps provide smooth and precise control for all handling tasks.
| Performance Data | |
|---|---|
| Breakout Force | 55 kN / 12364.5 lbf |
| Drawbar Pull | 5000 kg / 11023.1 lb |
| Gradeability | 45 % |
| Lift Capacity at Full Height _Stabs Up_ | 2600 kg / 5732 lb |
| Lift Capacity at Max Reach (Stabs Up) | 1150 kg / 2535.3 lb |
| Load Center | 0.5 m / 1 ft 8 in. |
| Maximum Lift Capacity | 3500 kg / 7716.2 lb |
| Maximum Lift Height | 6.90 m / 22.6 ft |
| Maximum Reach | 3.90 m / 12.8 ft |
| Outriggers or Stabilizers | No |
| Outside Turning Radius | 3.89 m / 12 ft 9 in. |
| Speed - Maximum Crowd | 2.7 sec. |
| Speed - Maximum Dump | 2.2 sec. |
| Speed - Maximum Lift | 5.9 sec. |
| Speed - Maximum Lower | 5.6 sec. |
| Speed - Maximum Telescope In | 4.5 sec. |
| Speed - Maximum Telescope Out | 6 sec. |
| Speed - Maximum Travel | 32 km/h / 19.9 mph |
| Speed Travel - 1st Gear | 8 km/h / 5 mph |
| Speed Travel - 2nd Gear | 32 km/h / 19.9 mph |
| Towing Capacity | 5000 kg / 11023.1 lb |
| Dimensional Data | |
|---|---|
| Cab Width | 0.89 m / 2 ft 11 in. |
| Ground Clearance | 0.46 m / 1 ft 6 in. |
| Machine Height | 2.45 m / 8 ft |
| Machine Length | 4.23 m / 13 ft 11 in. |
| Machine Length (Forks) | 4.8 m / 15 ft 9 in. |
| Machine Width | 2.33 m / 7 ft 8 in. |
| Tire Size | 405/70-24MPT01 |
| Track Width | 1.86 m / 6 ft 1 in. |
| Wheelbase | 2.98 m / 9 ft 9 in. |
| Power Source | |
|---|---|
| Capacity - Coolant | 17.50 L / 4.6 gal. |
| Capacity - Engine Oil | 10.40 L / 2.7 gal. |
| Capacity - Fuel Tank | 102 L / 26.9 gal. |
| Engine Horsepower | 74.90 kW / 100.4 hp |
| Engine Manufacturer | Deutz |
| Engine Model | TCD 2012 Stage IIIA |
| Maximum Engine RPM | 2100 rpm |
| General Specifications | |
|---|---|
| Axle-Front | High Bias, Limited Slip |
| Axle-Rear | Oscillating |
| Capacity - Hydraulic Reservoir | 95.50 L / 25.2 gal. |
| Carriage Rotation | 143 Degrees |
| Function Pump Type | Load Sensing Piston |
| Hydraulic System Flow | 102 L/Min / 26.9 gal/min. |
| Hydraulic System Pressure | 260 bar / 3771 psi |
| Operating Vehicle Weight | 8096 kg / 17848.6 lb |
| Service Brake Type | Wet Multi-Disc |
| Transmission - Nr Forward Gears Standard | 2 |
| Transmission - Nr Reverse Gears | 2 |
| Transmission Type | Hydrostatic |